dkoczur
| Joined: | Thu, Dec 3rd 2020, 13:45 | Roles: | N/A | Moderates: | N/A |
Latest Topics
| Topic | Created | Posts | Views | Last Activity |
|---|---|---|---|---|
| ARRL EFHW KIT | May 2nd 2022, 12:08 | 4 | 5,968 | on 5/5/22 |
Latest Posts
| Topic | Author | Posted On |
|---|---|---|
| ARRL EFHW KIT | dkoczur | on 4/5/22 |
| Thanks. The question I was asking concerning bonding the power supply and transiever was is groundind to the same point I have the lightbing arrestor grounded the best place to ensure a single point ground or is there a better place? |
||
| ARRL EFHW KIT | dkoczur | on 2/5/22 |
| I built the ARRL EFHW kit and intend to use in on 80-10 M Bands. I built the 110 microHenry choke. I will install it with the 49:1 transformer about 10 Ft off the ground and the other end about 40 ft in the air fastened to a tree. I intend on tuning the length of the 40-10 M section first and then adding the short 80M section with the choke and then tuning the length of that.I will have 25 FT of RG-8X putside and 25 FT inside. I have alightning arrestor to install at the enterance to the house and connected with a 8 Ft wire to the main panel ground connection. I have an ICOM 7300 and a Astron power supply. The dc of the power supply is not connected to the case. I have the following questions: 1. Since the lightning arrestor will ground the coax do I need a ground at the transformer? 2. Do I need an isolation arrestor? 3. Do I need a CMC? 4. When I bond the power supply and Transiever together, do I need to run a separate ground out to the same point as the lightning arrestor is grounded? I just got my General Class and thgis is my first HF shack. |
||
